Mull-Seal™ and Poly-Seal™ Tapes and Pads

• Bridges the Gap Between and Around Windows
• Provides "weatherboard style" Flashing
• Instant, Uniform Seal Conforms to Corners
• Long, Reliable Service Life

PRODUCT FEATURES:

Mull-Seal is a 1.5 mil TEDLAR® roof and wall sealing tape with 15 mil layer of butyl adhesive sealant
Poly-Seal is an 18 mil butyl tape with a 3 mil UV resistant (10+ yrs) white or black HDPE film back.
Both tapes provide an instant, uniform seal
Butyl adhesive is full compatible with all standard building materials
Both conform to corners and irregular surfaces
Long service life (20+ years)
Exceptional UV stability
Flexible packaging to meet your needs:
Rolls of tape with widths of 2 to 6 inches
Die-cut shapes to meet your specific needs

USER ADVANTAGES:

Quick, easy application with immediate bond
Excellent adhesion to ALL surfaces
Superior surface contact, no voids
Flexible at low and high temperatures
Less than 0.5% moisture absorption
Excellent resistance to weather extremes, UV and harsh environments
Chemical resistance no visible effect from acids, bases or solvents
Heavy-duty Release Liner prevents distortion during installation and assures consistent, accurate application
Poly-Seal meets new AAMA installation procedures which call for a "weatherboard style" flashing around the exterior of new construction windows.

MULL-SEAL™ & POLY-SEAL™ TECHNICAL DATA
Appearance	-Non-gloss white backing with gray adhesive / sealant
Application	- Clean surface - NO dust, dirt or moisture - Peel off few inches of release liner. Apply exactly the first time, trying to remoe may damage tape and surface to which it is being applied. DO NOT STRETCH. - Press down firmly starting in the center and working towards the outside edges, removing bubbles. Some wrinkles should not affect performance. - Edges must have no openings, tunnels or fishmouths.
Bonding Time	- Immediate, water-tight aggressive grip. Full bond within 24 hours
Backing	1.5 mil TEDLAR® film (TEDLAR® is a registered trademark of DuPont)
Adhesive	-15 mil gray elastomeric modified butyl rubber (proprietary)
Standard Widths	- 2, 3, 4, or 6 inches; Other widths and die cut shapes available per quotation
Application Temp.	- 35°F to 110°F
Operating Temp.	- -20°F to 200°F
Low. Temp. Flexbility	- Passes, no cracking (adhesive)
Tensile Strength	- 445 psi (with 60% elongation of adhesive / sealant)
Peel Strength	- 10 lbs per linear inch (adhesive)
Water Resistance	- Excellent. Surface must be clean and dry before application.
UV Resistance	- Excellent
Composition	- No asphalt, no solvent, no harmful VOC's

H-O Products Corp.
12 Munro Street • Winsted, CT 06098
Tel: 860-379-9875 • Fax: 860-738-1260
email: sales@h-oproducts.com

H-O Products, Corporation - A leading manufacturer of weather stripping, foam tape, acoustical foam, pressure sensitive tape, door weather stripping, glass to metal seals, and rubber or adhesive weather seals for the fenestration industry, window and door dealers, roofing and drywall suppliers, HVAC component, packaging supplies, manufacturers and distributors.